- Article number:
- SK 3105.370
- Product description
- Enclosure heaters to regulate relative humidity, prevent temperatures from dropping below the dew point and stop condensation forming inside the enclosure. This prevents consequential damage associated with corrosion or electrical short circuits.
- Material
- Aluminum, anodized
- Supply includes
- PTC heater
Quick-connection terminal
Fasteners - Note
- A thermostat is recommended for precise temperature control inside the enclosure
- In order to prevent condensation on assemblies, hygrostat is recommended to regulate heating
- In larger enclosures, even heat distribution is best achieved by installing several low-output heaters.
- Note on Model No.:
- Operation at a temperature of -40 °C is possible. Upon request, you will receive a manufacturer's declaration.
- Special voltages available on request. We reserve the right to make technical modifications.
- Continuous thermal output at 10 °C
- 130 W ‐ 150 W( 444 BTU/h ‐ 512 BTU/h )
- Rated operating voltage
- 110 V - 240 V, 1~, 50 Hz/60 Hz
- Dimensions
- Width: 90 mm
Height: 180 mm
Depth: 75 mm( Width: 3.54 ˝
Height: 7.09 ˝
Depth: 2.95 ˝ ) - Pre-fuse
- Miniature circuit-breaker/fuse: 4 A
- Protection category IP to IEC 60 529
- IP 20
- Protection category
- II (total insulation)
- Operating temperature range
- -33 °C...65 °C( -27 °F...149 °F )
- Packaging unit
- 1 pc(s).
- Net weight
- 0.85 kg
- Gross weight
- 0.935 kg
- Customs tariff number
- 85162999
- EAN
- 4028177638679
- ETIM 9
- EC000737
- ETIM 8
- EC000737
- ECLASS 8.0
- 27180710
- Product description
- SK enclosure heater, without fan, 130-150 W, 110-240 V, 1~, 50/60 Hz, WHD: 90 x 180 x 75 mm
Enclosure Heater without fan
Article number: SK 3105.370
Enclosure heaters to regulate relative humidity, prevent temperatures from dropping below the dew point and stop condensation forming inside the enclosure. This prevents consequential damage associated with corrosion or electrical short circuits. Version without fan. Continuous thermal output 10 – 150 W.