- Article number:
- DK 7644.000
- Design
- with 482.6 mm (19") pull-out frame
- Material
- Enclosure: Sheet steel
Viewing window: Single-pane safety glass, 3 mm - Surface finish
- Enclosure: Powder-coated
Pull-out frame: Stainless steel - Colour
- RAL 7035
- Supply includes
- Enclosure with hinged door
Cam lock with 3 mm double-bit insert
Gland plate with brush strip for cable entry in the enclosure base
Pull-out frame attached to telescopic slides
Outlet filter in enclosure base and on left-hand side
Viewing window on right-hand side
Cable clamp rail on rear wall
Additional cable clamp rail for mounting on the pull-out frame - Dimensions
- Width: 600 mm
Height: 600 mm
Depth: 350 mm - Installation height for components
- 10 U
- Installation height U mounting frame vertical
- 4 U
- Door hinge position
- left
- Number of locks
- 2
- Basic material
- Sheet steel
- Protection category to IEC 60 529
- IP 54 in conjunction with gland plate for cable gland
- Packs of
- 1 pc(s).
- Net weight
- 25.175 kg
- Gross weight
- 26.5 kg
- Customs tariff number
- 94032080
- EAN
- 4028177187146
- ECLASS 8.0
- 27142408
- Approvals
- Lloyds Register of Shipping
Wall-mounted distributor enclosure with 482.6 mm (19")
pull-out frame
Enclosure:
Wall-mounted distributor with sheet steel front door,
including two cam locks and double-bit lock inserts, a
gland plate with cable entry brush strips fitted at
bottom, outlet filters fitted at the right of the base
and top left of the side panel, fan expansion kit can
be fitted as an optional upgrade, a combi-rail with
cable clamping hammer-heads as well as a cable clamping
rail for attaching to the pull-out frame at the rear, a
viewing window fitted in the right side, a pull-out
frame mounted on telescopic rails with a 482.6 mm (19")
mounting level, 10 U, horizontally and vertically at
the front and a 482.6 mm (19") mounting level, 4 U,
vertically fitted at the side.
Material:
Wall section, enclosure cover, front door made from
sheet steel, 3 mm single-pane viewing window
Surface finish:
Enclosure: electrophoretic dipcoat, spray finished,
RAL 7035
Pull-out frame: stainless steel.
Dimensions (W x H x D):
600 x 600 x 350 mm / (4 / 10 U)
pull-out frame
Enclosure:
Wall-mounted distributor with sheet steel front door,
including two cam locks and double-bit lock inserts, a
gland plate with cable entry brush strips fitted at
bottom, outlet filters fitted at the right of the base
and top left of the side panel, fan expansion kit can
be fitted as an optional upgrade, a combi-rail with
cable clamping hammer-heads as well as a cable clamping
rail for attaching to the pull-out frame at the rear, a
viewing window fitted in the right side, a pull-out
frame mounted on telescopic rails with a 482.6 mm (19")
mounting level, 10 U, horizontally and vertically at
the front and a 482.6 mm (19") mounting level, 4 U,
vertically fitted at the side.
Material:
Wall section, enclosure cover, front door made from
sheet steel, 3 mm single-pane viewing window
Surface finish:
Enclosure: electrophoretic dipcoat, spray finished,
RAL 7035
Pull-out frame: stainless steel.
Dimensions (W x H x D):
600 x 600 x 350 mm / (4 / 10 U)