Base/plinth system VX

Base/plinth system VX

Base/plinth corner pieces with base/plinth trim panels, front and rear for base/plinth system VX, sheet steel

Base/plinth corner pieces with trim panels for flexible cable entry.

Base/plinth system VX

Base/plinth trim panels, side for base/plinth system VX, sheet steel

To finish off a base/plinth unit at the sides and for additional stability or interior configuration of bayed base/plinths. One 200 mm high or two 100 mm high trim panels may optionally be fitted on 200 mm high base/plinths.

Base/plinth system VX

Base/plinth trim panels, vented for base/plinth system VX, sheet steel

For venting the enclosure via the base/plinth. With a 200 mm base/plinth height, one or two vented trim panels may optionally be used. Thanks to the optional trim panel attachment, the vented trim panels may also be fitted at the side of the...

Base/plinth system VX

Base/plinth trim panels with brush strip for base/plinth system VX, sheet steel

For cable entry in the base/plinth. With a 200 mm base/plinth height, one or two trim panels with brush strip may optionally be used. Thanks to the optional trim panel attachment, the trim panels with brush strip may also be fitted at the front,...

Base/plinth system VX

Base/plinth corner pieces with base/plinth trim panels, front and rear for VX base/plinth system, stainless steel New version

Base/plinth corner pieces with front and rear trim panel. Large openings in the base/plinth corner piece for optimum access to the screw connection. Seamlessly bayable.

Base/plinth system VX

Base/plinth trim panels, sides, for VX base/plinth system, stainless steel New version

Stainless steel base/plinth trim panels are used in the depth to finish off a base/plinth unit at the sides.

Base/plinth system VX

Base/plinth baying brackets for base/plinth system VX, sheet steel

Required when mounting the 100 mm or 200 mm side trim panels rotated through 90° for additional stabilisation while transporting bayed enclosures.

Base/plinth system VX

Base mounting plate for base/plinth system VX, sheet steel

For fastening the base/plinth to the floor without moving the enclosure or bayed enclosure suite.

Base/plinth system VX

Optional trim panel attachment for VX For trim panel with brush strip, vented trim panel

Additional bracket for attaching trim panels with brush strip or vented trim panel in the depth of the VX base/plinth system.

Base/plinth system VX

Base/plinth installation bracket for base/plinth system VX, sheet steel

For configuring the base/plinth with punched sections with mounting flanges or support strips. To fit 100 and 200 mm high base/plinth trim panels in sheet steel.

Base/plinth system VX

Bracket/spacer for base/plinth system VX, sheet steel

For flexible attachment of C rails or cable clamp rails. For installation in the VX base/plinth or on the enclosure frame section.

Base/plinth system VX

Levelling component for base/plinth system VX, sheet steel

For retrospective levelling on uneven floors at the installation site up to a maximum of 15 mm. Installed through the base/plinth corner piece.

Base/plinth system VX

Base/plinth adaptor for base/plinth system VX, sheet steel

For mounting twin castors 7495.000 or levelling feet to the VX base/plinth system.

Base/plinth system VX

Transport castors for base/plinth system VX, sheet steel

For locating onto the base/plinth corner piece 100 or 200 mm high.

Base/plinth system VX

Base/plinth corner pieces with base/plinth trim panels, front and rear, 200 mm, stainless steel

Base/plinth corner pieces with moulded self-positioning to the bayed enclosure system, for use with or without trim panels depending on the application. Large openings in the base/plinth corner piece for optimum access to the screw-fastening point may...

Base/plinth system VX

Base/plinth corner piece with base/plinth trim panels, front and rear, 100 mm, stainless steel for VX, TS, VX SE

Base/plinth corner pieces with moulded self-positioning to the bayed enclosure system, for use with or without trim panels depending on the application. Large openings in the base/plinth corner piece for optimum access to the screw-fastening point may...

Base/plinth system VX

Base/plinth trim panels, side, 200 mm, stainless steel for base/plinth system VX

Stainless steel base/plinth trim panels are used in the depth to finish off a base/plinth unit at the sides.

Base/plinth system VX

Base/plinth trim panels, side, 100 mm, stainless steel for base/plinth system VX

Stainless steel base/plinth trim panels are used in the depth to finish off a base/plinth unit at the sides or for the interior installation of bayed base/plinths. The 100 mm high trim panels may also be used in a 200 mm high base/plinth and combined.

Base/plinth system VX

Base/plinth installation bracket for base/plinth system VX, stainless steel

For configuring the base/plinth with punched sections with mounting flanges or cable clamp rails. To fit 100 and 200 mm high base/plinth trim panels in stainless steel.

Base/plinth system VX

Baying cover for base/plinth system VX, stainless steel

To neatly close the gap between two bayed base/plinths and it is required to close the gap at the rear when baying three or more base/plinths.

Base/plinth system VX

Filter mat for base/plinth trim panels, vented

The filter mat is simply inserted into the trim panel from the rear. May be shortened to required length.

Base/plinth system VX

Base/plinth adaptor for twin castors and levelling feet

For mounting twin castors 7495.000 and levelling feet to the VX, AX base/plinth system.

Base/plinth system VX

Base/plinth adaptor, stainless steel New version

For mounting the levelling feet on the VX base/plinth system, stainless steel

Base/plinth system VX

Cover caps, stainless steel for base/plinth system VX, stainless steel

To replace the plastic cover caps of the base/plinth corner pieces with base/plinth trim panels, front and rear, included in the supply.