- Article number:
- TE 7000.840
- Benefits
- No frame structure
- Optimum accessibility
- Readily dismantled and therefore easily installed
- Material
- Sheet steel
Glazed door: Single-pane safety glass, 4 mm - Surface finish
- Mounting frame: Dipcoat-primed
Enclosure panels: Powder-coated - Colour
- RAL 7035
- Supply includes
- Self-supporting 482.6 mm (19") mounting frames, front and rear, depth-variable
Glazed door at the front, incl. 130° hinge, recessed handle and security lock 3524 E
Sheet steel door at the rear, including 130° hinge, security lock 3524 E
Side panels, lockable, including security lock 3524 E
Base frame with maximum cut-out (for optional population with module plates)
Roof plate including brush strip for cable entry and concealed cut-out for optional fan.
Levelling feet M12, levelling range 40 mm
Spacers, 20 mm (supplied loose) to raise the roof
Flex-Block base/plinth 100 mm, vented
Tested frame earthing to IEC 60 950, fitted
4 C rails, for cable clamping in the enclosure depth via cable clamps (supplied loose)
10 cable shunting rings, metal, 125 x 65 mm (supplied loose)
50 multi-tooth screws M5, cage nuts M5, conductive (supplied loose) - Dimensions
- Width: 800 mm
Height: 1,300 mm
Depth: 800 mm - Units
- 24 U
- Distance between levels as delivered
- 495 mm
- Basic material
- Sheet steel
- Packs of
- 1 pc(s).
- Weight/pack
- 99.7 kg
- EAN
- 4028177461666
- ETIM 7.0
- EC002499
- ECLASS 8.0
- 27180207
- Product description
- TE Network enclosure TE 7000, WHD: 800x1200+100x800 mm, Pre-configured, With glazed door, with side panels
- Documentation
- Instructions
TE 7000 network enclosure, preconfigured
TE 7000.840
Screw-fastened, dismountable enclosure design based on
self-supporting 482.6 mm (19") mounting angles, which
simultaneously form the enclosure frame. Modular roof
and base frames that can be connected together using
482.6 mm (19") mounting frames to form a supporting
enclosure frame. Quick-release, lockable side panels,
including 3524 E security lock. Front glazed door,
with 4 mm safety glass, rear sheet steel door. Both
include 2-point locking rod, recessed handle, 3524 E
security lock, can be exchanged for Ergoform S-handle
system for integrating a semi-cylinder if required.
Door catch position can also be changed; 130° door
opening angle. Roof plate with integrated brush strip;
ready to connect up fan-and-filter unit including
thermostat control is an optional upgrade. Two depth
adjustable 482.6 mm (19") mounting frames
with integrated 25 mm system punching are used for the
internal assembly. The 19" mounting frame is
infinitely selectable. 200 kg maximum load capability
per mounting level, max. 400 kg for each rack.
The enclosure system is a bayed system.
Preconfigured enclosure version:
With 100 mm vented Flex-Block base/plinth system,
tested pre-configured frame earthing to EN 60950,
accessories for cable routing (cable clamp rails,
cable shunting rings) and 19" assembly parts, already
included with the supply.
Supply includes: Enclosure including base/plinth and
spacer bolts for raising the roof.
Material: Sheet steel
Surface finish: RAL 7035
Approvals: -
Dimensions (WHD): 800 x (1200+100) x 800 mm
Installation clearance height: 24 U
Protection category: IP 00, (IP 20 possible when
sealing the cable entry in the roof)
Model No: TE 7000.840
Manufacturer: Rittal GmbH & Co.KG
TE 7000.840
Screw-fastened, dismountable enclosure design based on
self-supporting 482.6 mm (19") mounting angles, which
simultaneously form the enclosure frame. Modular roof
and base frames that can be connected together using
482.6 mm (19") mounting frames to form a supporting
enclosure frame. Quick-release, lockable side panels,
including 3524 E security lock. Front glazed door,
with 4 mm safety glass, rear sheet steel door. Both
include 2-point locking rod, recessed handle, 3524 E
security lock, can be exchanged for Ergoform S-handle
system for integrating a semi-cylinder if required.
Door catch position can also be changed; 130° door
opening angle. Roof plate with integrated brush strip;
ready to connect up fan-and-filter unit including
thermostat control is an optional upgrade. Two depth
adjustable 482.6 mm (19") mounting frames
with integrated 25 mm system punching are used for the
internal assembly. The 19" mounting frame is
infinitely selectable. 200 kg maximum load capability
per mounting level, max. 400 kg for each rack.
The enclosure system is a bayed system.
Preconfigured enclosure version:
With 100 mm vented Flex-Block base/plinth system,
tested pre-configured frame earthing to EN 60950,
accessories for cable routing (cable clamp rails,
cable shunting rings) and 19" assembly parts, already
included with the supply.
Supply includes: Enclosure including base/plinth and
spacer bolts for raising the roof.
Material: Sheet steel
Surface finish: RAL 7035
Approvals: -
Dimensions (WHD): 800 x (1200+100) x 800 mm
Installation clearance height: 24 U
Protection category: IP 00, (IP 20 possible when
sealing the cable entry in the roof)
Model No: TE 7000.840
Manufacturer: Rittal GmbH & Co.KG