- Article number:
- DK 5501.460
- Benefits
- Tool-free, time-saving one-man assembly from the enclosure front
- All three mounting holes in the EIA system punchings are available for screw-fastening the equipment.
- Alternatively, direct screw fastening in the TE 8000 to the 482.6 mm (19") system punchings is also possible
- Applications
- For mounting on the front mounting level
- To support heavy installed equipment
- To adapt to individual distances between 482.6 mm (19") levels
- Material
- Sheet steel
- Surface finish
- Zinc-plated
- Supply includes
- Assembly parts
- Installation options
- 482.6 mm (19") L mounting angles, front and rear
- 482.6 mm (19") mounting frames front and rear
- for 482.6 mm (19") mounting angles, standard
- Load capacity
- 800 N
- Note
- Effective contact surface 25 mm per side
- To fit
- Enclosure type: VX IT
TE
TX CableNet - Distance between levels
- 400 ‐ 600 mm
- Packs of
- 2 pc(s).
- Net weight
- 2.164 kg
- Gross weight
- 2.34 kg
- PCF per pack (cradle-to-gate)
- 9 kg CO2 eq (Cat B)
- Note on PCF category
- Category B: PCF value (cradle-to-gate) based on the product weight, approximately calculated and self-declared
- Customs tariff number
- 73269098
- EAN
- 4028177679016
- ETIM 9
- EC002620
- ECLASS 8.0
- 27189261
- Product description
- DK Slide rail, support surface width: 25 mm, depth-variable, 80 kg, For two 482.6 mm (19")-mounting angles (front+rear), distance between levels:: 400-600 mm
- Documentation
- Instructions
482.6 mm (19") - slide rails, depth-variable
Depth-variable slide rails for L-shaped mounting
angles and similar shapes of mounting angles.
For mounting between a pair of mounting angles
and to support heavy installed equipment.
Distance between 482.6 mm (19") levels from
400-600 mm, load capacity 80 kg.
The slide rails have vent holes across the entire
depth to support the climate control of integral
components.
Tool-free, time saving one-man assembly from the
enclosure front.
Locate, pull-out, snap into position.
All three mounting holes in the 482.6 mm (19") system
punchings are available for screw-fastening the
equipment.
Material: Sheet steel
Surface finish: Zinc-plated
Model No. DK: 5501.460
Manufacturer: Rittal
Depth-variable slide rails for L-shaped mounting
angles and similar shapes of mounting angles.
For mounting between a pair of mounting angles
and to support heavy installed equipment.
Distance between 482.6 mm (19") levels from
400-600 mm, load capacity 80 kg.
The slide rails have vent holes across the entire
depth to support the climate control of integral
components.
Tool-free, time saving one-man assembly from the
enclosure front.
Locate, pull-out, snap into position.
All three mounting holes in the 482.6 mm (19") system
punchings are available for screw-fastening the
equipment.
Material: Sheet steel
Surface finish: Zinc-plated
Model No. DK: 5501.460
Manufacturer: Rittal