This item will be discontinued on: Jan 30, 2020
This item is being replaced by:
- Article number:
- AE 1260.500
- Material
- Enclosure: Sheet steel
Door: Sheet steel, all-round foamed-in PU seal - Surface finish
- Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint
Mounting plate: Zinc-plated - Colour
- RAL 7035
- Supply includes
- Enclosure with hinged door(s), of all-round solid construction
Gland plate(s) in enclosure base
Mounting plate
Lock: 3 mm double-bit
3-point lock system - Protection category NEMA
- NEMA 4
- Protection category to IEC 60 529
- IP 66
- IK Code
- IK08
- Dimensions
- Width: 600 mm
Height: 1,200 mm
Depth: 300 mm - Material thickness - door
- 2 mm
- Material thickness - enclosure
- 1.5 mm
- Material thickness of mounting plate
- 3 mm
- Dimensions mounting plate (W x H)
- 540 mm x 1,155 mm
- Number of doors
- 1
- Interchangeable door hinge
- Yes
- Lock
- Lock version: 3-point lock system
Number of locks: 1
Lock insert: 3 mm double-bit - Gland plate
- Size: 5
Qty.: 1 - Basic material
- Sheet steel
- Packs of
- 1 pc(s).
- Weight/pack
- 51 kg
- Customs tariff number
- 94032080
- EAN
- 4028177252448
- ETIM 8
- EC000261
- ETIM 7.0
- EC000261
- ECLASS 8.0
- 27180101
- Product description
- AE Compact enclosure, WHD: 600x1200x300 mm, Sheet steel, with mounting plate, single-door, 3-point lock system
Enclosure (compact enclosure), protection category IP
66
Enclosure:
sturdy sheet steel construction of 1.25 mm or 1.5 mm
sheet steel, folded and welded from a single piece,
with all-round protection channel on the door aperture,
rear panel with recessed holes for wall brackets.
Enclosure bottom with sheet steel gland plates.
Door(s):
1.5 mm - 2 mm sheet steel, sealed, with foamed-in seal,
perforated vertical mounting strips on both sides,
screw-fastened hinges. Door hinge may be swapped from
right to left in all single-door enclosures, 130°
opening angle to VDI (can be retrofitted to 180°),
3-point lock system.
Mounting plate:
2 - 3 mm sheet steel with system punching,
depth-adjustable on studs, zinc-plated.
Accessories:
lock inserts, wall brackets, plastic gland plate, earth
straps, wiring plan pockets, door stay,
viewing window, operating panels, heat exchangers,
fan-and-filter units, heaters, swing frames, electronic
accessories, (only for 600 mm wide enclosures), rain
canopy, 180° hinge
Surface finish:
steel is cleaned, degreased, phosphated,
electrophoretic dipcoat primed and polyester
powder-coated in textured RAL 7035.
Dimensions (W x H x D): 600 x 1200 x 300 mm
66
Enclosure:
sturdy sheet steel construction of 1.25 mm or 1.5 mm
sheet steel, folded and welded from a single piece,
with all-round protection channel on the door aperture,
rear panel with recessed holes for wall brackets.
Enclosure bottom with sheet steel gland plates.
Door(s):
1.5 mm - 2 mm sheet steel, sealed, with foamed-in seal,
perforated vertical mounting strips on both sides,
screw-fastened hinges. Door hinge may be swapped from
right to left in all single-door enclosures, 130°
opening angle to VDI (can be retrofitted to 180°),
3-point lock system.
Mounting plate:
2 - 3 mm sheet steel with system punching,
depth-adjustable on studs, zinc-plated.
Accessories:
lock inserts, wall brackets, plastic gland plate, earth
straps, wiring plan pockets, door stay,
viewing window, operating panels, heat exchangers,
fan-and-filter units, heaters, swing frames, electronic
accessories, (only for 600 mm wide enclosures), rain
canopy, 180° hinge
Surface finish:
steel is cleaned, degreased, phosphated,
electrophoretic dipcoat primed and polyester
powder-coated in textured RAL 7035.
Dimensions (W x H x D): 600 x 1200 x 300 mm