Baying Systems

Baying Systems

Baying kit for AX, KX, AE, KL

For baying AX/KX enclosures. The additional cut-outs are to be provided by the customer.

Baying Systems

Baying block, internal for VX, VX IT

Flexible positioning and mounting all around the baying station. Lateral mounting creates a flush and buildable surface on the profile.

Baying Systems

Baying bracket, internal for VX, VX IT

Flexible positioning and mounting all around the baying station. For quick and safe installation, either from the front or from the side.

Baying Systems

Baying connector, external for VX, VX IT

For mounting on vertical enclosure sections from the outside.

Baying Systems

VX 25 baying kit for TS 8

For expanding existing TS 8 enclosure suites with VX25 enclosures.

Baying Systems

Quick-fit baying connector, one-piece for TS/TS

Simply attach the screws, insert the quick-release baying connector, tap in with a hammer and secure.

Baying Systems

Quick-fit baying connector, three-piece for TS/TS

Insert the quick-release baying connector, connect using the lock plate, and secure.

Baying Systems

Baying clamp, horizontal for TS/TS, TS/PS

To mount on horizontal enclosure profiles.

Baying Systems

Baying clamp, vertical for TS/TS

To mount on the vertical profiles of two TS enclosures.

Baying Systems

Baying connector, external for TS/TS

To mount on vertical enclosure profiles from the outside.

Baying Systems

Baying bracket for TS/TS

To provide a sturdy joint when transporting bayed enclosure suites.

Baying Systems

Baying brackets for TS/TS, TS/PS

To provide additional stabilization, or in cases where mounting plate brackets, pivoting frame or busbar support prevent the installation of angular baying brackets.

Baying Systems

Baying bracket

The alternative to baying bracket 4582.500 and for individual interior fitting.

Baying Systems

Combination angle for VX, TS

For optimum distribution of tensile forces during transportation of bayed enclosures by crane.

Baying Systems

Baying attachment, vertical for TS/TS

For baying two populated enclosures on the vertical enclosure profile. Using the fastening bolts, the enclosure is pulled into a defined end position, with a height or side offset of up to ± 2 mm.

Baying Systems

Baying attachment, vertical for TS/TS with divider panel

Only suitable for mounting in conjunction with the divider panel angle brackets.

Baying Systems

Baying cover, top for VX, VX IT, TS, TS IT

A clip-in cover with two end caps is also available to cover the seal between two enclosures. This prevents dirt and moisture from collecting on the baying seal.

Baying Systems

Baying cover, vertical

To align the gap between the side panels when baying back-to-back. For enclosure height 2200 mm, or cut to length individually for lower heights.

Baying Systems

Baying connector, external, 9 mm for VX, VX IT, TS IT/TS IT with side panels

For retrospective baying of enclosures with screw-fastened or lockable side panels.

Baying Systems

Kit for separate frame TS

Kit for separate TS frame.

Baying Systems

Baying kit for CS Toptec, bayable

For the alignment of CS Toptec outdoor housings.