- Article number:
- VX 8604.450
- Version
- Surface coating to DIN EN ISO 12944, corrosion protection class C4-H
- Material
- Enclosure frame: Carbon steel, 1.5 mm
Roof: Carbon steel, 1.5 mm
Door: Carbon steel, 2.0 mm
Rear wall: carbon steel, 1.5 mm
Base plates: Carbon steel, 1.5 mm
Mounting panel: Carbon steel, 3.0 mm - Surface finish
- Enclosure frame: Zinc-magnesium and powder coating
Door, roof and rear panel: Powder-coated, textured paint
Mounting plate and base plates: Zinc-plated - Color
- RAL 7035
- Supply includes
- Enclosure frame
Door(s)
Door hinged on the right, may be swapped to the left
Roof plate
Rear panel
Base Plates
Mounting panel
2 punched rails, 18 x 39 mm
Lock: 3 mm double-bit - Dimensions
- Width: 600 mm
Height: 2,000 mm
Depth: 400 mm( Width: 23.6 ˝
Height: 78.7 ˝
Depth: 15.7 ˝ ) - Dimensions of mounting plate (W x H)
- 499 mm x 1,896 mm( 19.6 ˝ x 74.6 ˝ )
- Protection category IP to EN 60 529
- IP 55
- Type rating according to UL 50E
- Type 1
- Type 12
- IK code
- IK10
- Number of doors
- 1
- Note
- Installation and maintenance: DIN EN ISO 12944 refers to corrosion protection for steel structures (e.g. containers and bridges) and is thus only indirectly applicable to enclosures. The test criteria defined in this standard were nevertheless applied to the paint finishes of the C4-H enclosures. Our “paint finish equivalent to C4-H” thus satisfies all requirements of the standard in respect of the 720-hour salt spray mist test. Even so, corrosion can still occur on such sheet-steel enclosures. If the enclosure is installed in an environment where there is a risk of corrosion, the user must provide for regular maintenance and the prompt repairing of any paint damage. Depending on the application, the user may need to take suitable precautions as protection against environmental conditions at the place of installation, e.g. UV radiation.
- Base material
- Carbon steel
- EAN
- 4028177993648
- ETIM 9
- EC000261
- ETIM 8
- EC000261
- ECLASS 8.0
- 27180101
- Product description
- VX baying enclosure system C4-H, WxHxD: 600x2000x400 mm, sheet steel, with mounting plate, single door at the front
Baying-enclosure system VX25 C4-H
Article number: VX 8604.450
The standard in enclosure manufacturing: Enclosure frame with one front door, rear panel, mounting plate, roof plate, divided gland plates. Perfectly suited to efficient enclosure interior installation. Surface coating to DIN EN ISO 12944 corrosion protection class C4-H. Important: Please observe the product properties and the notes on installation and maintenance in the product description.